Tuesday, July 20, 2010

Day 210: Gearing up for the final stages!

Ran into our SS today - he was at our neighbour's site (which he also supervises), cleaning up all the loose rubbish on the block himself. Nice to see a SS who gets his hands dirty! Anyway, apparently we're still on track to get most of the internal fixing done by end of the month.

He did say we can get our carpets in before handover, which is brilliant news - now I'm wondering if we should get our stairs sanded & stained as well, before the carpets are installed. It's a matter of finding out whether a dark stain on the stairs (to match our front & rear doors) would be too dark - will check with Tina on that first. Be nice to have it done before carpets go in upstairs, for a neater finish.

Anyway, I grabbed a meat pie and sauce (the bakery around the corner does the best homemade beef & cheese pies with huge chunks!) and had lunch in the kitchen, daydreaming about how in the not-too-distant future we'd be in the kitchen cooking up a storm, watching TV, and just living the life in the house we've been dreaming and planning for the last 2-3 years!

No trades have been working the last few days, so I just wandered around, trying to see if there's any defects we need to keep an eye on for our final inspection. I don't think I'll bother our SS with anything I find at the moment, as there's still their own QA inspection and window service to be done, and there's still a lot of internal fitoffs to go. Anyway, here's a few minor things that will probably get fixed before our final inspection.

I've heard a lot about this window service thing, which is where all the windows get inspected and fixed before handover. A lot of our window frames were damaged externally during bricklaying with dents and scrapes, so they'll need to be fixed. Also, some windows are sticking or not straight. For example, this is the family room window: at the top there's a big gap, while at the bottom it's closed. Hopefully easily fixed with the window service.


And another example of window damage: in Bed 2, there's a nail protruding from the frame straight through the top frame. D'oh!


Then there's this issue which might be harder to fix: the ensuite window. I remember the bottom wooden frame for this window was removed at frame stage so the bath hob could be tiled right up to the window frame, but it appears the carpenters forgot to reinforce the bottom edge of the window, as now there's a pretty big bow in the window. Left unsupported, this window could just... fall! Needs fixing; but will probably require removal of some tiles, supporting/fixing the window frame, then repairing the bath hob, re-waterproofing, and re-tiling.



Now this isn't really a problem yet, but the manhole hasn't been put in Bed 4. Normally the manhole to the ground floor roof is in Bed 3, but due to our particular roof design, it needs to go in through Bed 4 robes. Pretty quick & easy job for the carpenters to stick in this manhole, but needs to be done before the electricians come in for fixing, as there's lots of wiring in the ground floor roof they'll need access too. And don't mind the apparent white lines in the robes, it's a reflection of my camera flash against the painted architraves!


Back to the ensuite, the shower niche and around the hob appear to be missing grout - but I've been told the plumbers will do some siliconing, to allow for flexing/movement of the tiles, rather than grout. Hopefully this big gap in the shower niche will be fixed too!



Internal doors: Rumpus room door has a huge crack in the bottom edges, looks like the door is coming apart! Needs to be repaired or replaced. Also the ensuite WC door has horrible dry patches all over it, and a big scar across the master bed door from the inside, both need repainting.


And finally for the day (long post, huh?) the bathroom sink is meant to have a light switch (for a light above the mirror) on one side, and a powerpoint on the other side. However, the electricians were meant to cutout on the walls prior to tiling, so the tiler could leave a cutout for them to get access to the wiring. But since they didn't (forgot?) to expose these switches, I'm not sure how they're going to locate them with the tiling all done! Anyway, not my problem to fix, they'll figure a way out.

Ultimately, these issues are all relatively minor and pretty obvious, and should be straightforward enough to fix. I'd be surprised if Metricon's Quality Assurance people didn't pick these things up before our final inspection, if a layperson can detect them!

And ultimately, we'd rather have all the little things fixed before we get our house - I know for sure that once I'm aware of something that's not 100% right, it'll annoy me forever until it gets fixed!

T&T

4 comments:

  1. Hi Tim & Tina. We're building with M too. Our Electrical Appointment is coming up. We've signed PC and done colours. We don't have working drawings with floor plan changes but were wondering how you went with your electrical appointment:
    1. How long did it take and did you get it all done in one day?
    2. Did you have final working drawings to work from at your appointment? If not, could you use what you had been given from PC?
    3. Did M send you an 'electrical survey' prior to your appointment, or anything else to help you prepare?
    Thanks
    P&N

    ReplyDelete
  2. Hi P&N. Please don't send in a dozen identical comments in less than 24 hours, as the comments are moderated. Just send one comment.

    As for your enquiry, it took us 3 hours, but were were fully prepared beforehand. We went on standard floorplans as our custom floorplan wasn't ready, and your CSC should email you prices and pictures before your appointment.

    T&T

    ReplyDelete
  3. We are about to start the Metricon big adventure! Just a quick question..as we have to pick tiles etc..which Beaumont store would you suggest to us in order to check the tiles and have a general look?

    ReplyDelete
  4. Hi Laura, go to the beaumont in Oakleigh as that's the one where you do all your selections, and ask them for a guide to the Metricon tile selections.

    T&T

    ReplyDelete

LinkWithin

Related Posts with Thumbnails